Vacuum pump DSN65

Our oil lubricated vane type DSN 65 vacuum pump is characterized by a low energy consumption and relatively low sound with a very high vacuum of 99.95%.

This leads to a clearly measurable increase in holding power, meaning that even with leakage the increased pressure means less chance of losing your workpiece.

With a solid construction and permanently lubricated bearings the oil cooled motor guarantees a long working life with low maintenance.

As noise and heat generation at the operator position can be a problem you usually want the vacuum pump positioned as far away from the control station as possible.

With that in mind we supply a 4 m cable complete with a switching device so you can safely operate the vacuum pump away from your machining centre.

You can fix the switching box with 2 screws to a wall or suitable fixture.

Technical Details

• Nominal pumping speed / flow 50Hz m3 / h -> 63 final
• Final pressure hPa (mbar) -> 0.5 (99.95% vacuum!)
• Motor Power kW 50Hz -> 1.5
• Rated motor speed 50Hz min-1 -> 1450
• Sound pressure level (DIN 45635) * 50Hz dB (A) -> 65
• Weight 70 Kg